Deactivating Autostart; Operating The Gigaset Wlan Adapter Monitor - Siemens Gigaset 300 Manual

Usb adapter

Hide thumbs Also See for Gigaset 300:

Table of Contents

Configuring the Gigaset USB Adapter 300

Deactivating Autostart

The Gigaset WLAN Adapter Monitor is opened automatically every time you launch

your PC. If you do not need the monitor all the time, you can deactivate Autostart.

Select Start - Programs - Autostart.

Right-click the Gigaset WLAN Adapter Monitor entry.

Select Delete to remove the link to Gigaset WLAN Adapter Monitor from Auto-

start.

Since this means that the monitor will not be launched each time you start your PC, you

will have to start it manually when required (see page 19).

In the Gigaset WLAN Adapter Monitor user interface, you will find various settings and

status displays for your network adapter on various tabs, which are described in detail

in the following section.

Buttons

Click the buttons beneath each tab to use one of the following options:

Wireless operation is activated for the network adapter (green

icon). The PC is available on the network.

Click Radio On to deactivate wireless mode on the network

adapter.

Radio Off is displayed. The PC is no longer available on the

network.

Wireless mode is deactivated for the network adapter (red icon).

The PC is not available on the network.

Click Radio Off to activate the network adapter's radio mode.

Radio On is displayed. The PC is available on the network.

Use the Help button to open the Gigaset WLAN Adapter Monitor

help file.

Use the Hide button to close the user interface of the Gigaset

WLAN Adapter Monitor.

The icon in the status area on the taskbar indicates that the

monitor is still active in the background.

Double-click this icon if you want to open the Monitor user

interface again.

Table of Contents