Setup Checklist / Commercial Mode Setup Overview - LG 32LD330H Owner's Manual

Setup Checklist / Commercial Mode Setup Overview

Setup Checklist
Installation and Setup Checklist
__ Unpack TV and all accessories.
__ Install batteries in remote control.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount or
stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.
Cable Connections
__ Make all connections to rear jack panel and RF
antenna on MPI/PPV card.
__ Make all connections to signal, interactive
resources, and Aux sources, as appropriate.
Commercial Mode Setup Overview
This document describes how to set up LD330H/LD333H Pro:Centric™ TVs for Commercial Mode either
while in Pass-through Mode or Free-To-Guest (FTG) Mode.
Pass-through Mode
This mode allows you to configure a Master TV Setup for cloning purposes as well as external VOD/PPV
control. Use the Installer Remote to configure Installer Menu items as required for TV operation and set up
TV features (Channel, Picture, Audio, etc.). See pages 12 to 13 for detailed information.
FTG Mode
This mode enables Pro:Idiom
remove the need for dash tuning. FTG Configuration Application software is used to configure and/or edit
FTG Channel Map and FTG Installer Menu settings. See pages 29 to 37 for information on FTG Mode
options and using the FTG Configuration Application.
6
®
decryption and also allows logical channel mapping of physical channels to
Commercial Mode Setup
__ Complete Commercial Mode Setup (configure
all relevant Installer Menu items as required of
your institution and configure display features
for the end user).
Software Installation
__ Install or configure any software, as applicable,
for example, PPV, etc.
206-4185