Commercial Mode Overview; Setup Checklist; Pass-Through Mode - LG Centric X950 Series Commercial Mode S Setyp Manual

Commercial Mode Overview

This document describes how to set up LY750H Pro:Centric
LG commercial TV functionality is based on "ownership" of the Channel Map; that is, the Channel Map
resides in the TV's CPU or Protocol Translator Card (PTC) or it resides externally from the TV (i.e., in a
device from the solution provider).
These TV models are capable of Free-To-Guest (FTG) Mode operation via the TV CPU. Alternatively, the
TV can be configured for Pass-through Mode (default). When in Pass-through Mode, these TV models also
allow external control via the TV's MPI port.

Setup Checklist

Note: This document provides information specific to Commercial Mode operation. Refer to the Owner's
Manual for information on TV installation and hardware and cable connections.
Installation
__ Unpack TV and all accessories.
__ Install batteries in the Installer Remote.
__ Install TV on VESA mount or stand.
Note: It may be advisable to make all cable
connections before installing on VESA mount
or stand, as appropriate.
Hardware Connections
__ Install any additional hardware as
appropriate to your institution, LAN, etc.

Pass-through Mode

This mode allows you to configure individual TVs for Pro:Centric and/or FTG Mode via CPU operation or
create a Master TV Setup for cloning purposes. This mode also allows external control via the MPI port
on the TV rear jack panel.
There are two methods for configuring individual TVs that are currently in Pass-through Mode: either
using the EZ-Manager Wizard or the Custom Master TV Setup procedure as described in this document.
EZ-Manager Wizard
When the TV is in a factory default state, the EZ-Manager Wizard provides automated or manual options
for configuring essential items for Pro:Centric operation and also provides an option for using a USB
memory device to configure the TV. Use the Installer Remote to make selections and complete each step.
See "EZ-Manager Wizard" on pages 12 to 19 for detailed information.
Custom Master TV Setup
The Custom Master TV Setup procedure enables you to create a customized Master TV Setup for cloning
purposes for TVs that are to remain in Pass-through Mode. Use the Installer Remote to configure Installer
Menu items as required for TV operation and set up TV features (Channel, Picture, Audio, etc.). See
"Custom Master TV Setup" on pages 32 to 35 for detailed information.
6
®
TVs for Commercial Mode operation.
Cable Connections
__ Make all rear jack panel connections, as
appropriate.
Commercial Mode Setup
__ Complete appropriate procedures as described
in this document for Commercial Mode operation.
206-4263