LG 32LD330H Owner's Manual page 283

Installer Menu (Cont.)
Installer Menu Items 073 through 119
Menu
Function
Item
073 CH NOT AVBLE
075 REVERT CH
078 UPN MSB
079 UPN MSB-1
080 UPN MSB-2
081 UPN LSB
082 CHKSM ERROR
083 HANDSHK TIME
084 PERMANENT BLK
087 REAR RGB EN.
088 EN NOISE MUTE
090 KEY LOCK
091 YPrPb2 EN
094 SAP MENU EN
096 DEF. ASP. RATIO
098 PRO:CENTRIC
099 BACK LIGHTING
102 ATSC BAND
103 ATSC TUNE MODE
104 START MINOR CH
106 ASP RATIO LOCK
116 VIDEO MUTE EN
117 FACT DEFAULT
119 DATA CHANNEL
16
Value Range Default Value
0 / 1 0
0 / 1 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 ~ 255 0
0 / 1 1
0 ~ 5 5
0 / 1 0
0 / 1 / 17 1
0 / 1 1
0 / 1 0
0 / 1 1
0 / 1 1
0 ~ 4 2
0 ~ 2 0
1 ~ 100,
100
101 ~ 200, 255
0 ~ 4 4
0 / 1 1
0 ~ 255 0
0 / 1 0
0 / 1 0
0 / 1 0
0 ~ 135 0
Brief Description of Function and Comments
If set to 1 and Channel Override is 0, "NOT AVAILABLE" message is displayed
when directly accessing a channel not in the favorite Channel List.
If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel.
User programmable number, most significant byte.
User programmable number, most significant byte - 1.
User programmable number, most significant byte - 2.
User programmable number, least significant byte.
Enforces rigid MPI checksum.
Relaxes MPI timing to be compatible with PC-based Windows-
Removes block hours setting for Parental Control and makes block permanent.
Set to 0 to disable RGB input. Set to 1 to enable RGB input.
Set to 17 for Auto Configure.
If set to 1, audio is muted if no signal is present.
If set to 1, keyboard is locked out, IR is still functional.
Set to 1 to enable HDMI 2 input.
Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on
Sets default aspect ratio at power up. See detailed descriptions and item 106.
Set to 0 to disable Pro:Centric operation. Set to 1 for Flash Mode. Set to 2 for
GEM (Java Application) Mode.
Sets the level of the TV picture back lighting. (See detailed descriptions.)
Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan.
Selects Minor Start Channel. Set to 0 for NTSC.
To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on
Set to 0 for Normal. Set to 1 for Blank.
Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings.
Set to 0 to disable. Set to the RF channel number of the Data Channel for
Pro:Centric or E-Z Installation data. (See detailed descriptions.)
controlled systems.
Function Menu.
Selects ATSC band.
power cycle.
206-4185