Installer Overview - LG 32LD330H Owner's Manual

Installer Overview

This is the Commercial Mode Setup Guide only.
Installer Menu / Commercial Mode Setup
To set up a Master TV, you will need to know how to enter the TV
Installer Menu and make changes to the default values as required.
Similarly, to configure a single TV's Installer Menu settings in FTG Mode,
you will need to know how to access and use the FTG Configuration
Application utilities. If necessary, familiarize yourself with the Installer
Menu and how to make and save changes. Refer to page 14 for informa-
tion on accessing the Installer Menu in Pass-through Mode. Refer to
page 23 for information on accessing the FTG Installer Menu
Configuration Utility in the FTG Configuration Application. Pages 15 to 20
describe Installer Menu items in detail.
Installer Remote
The LG Installer Remote is supplied with and dedicated to operate the
TV. See next page for typical key functions in TV operating mode. Some
DVD and VCR controls may be available for selected LG DVD/VCR
products.
Cloning
Cloning refers to the process of capturing a Master TV Setup and trans-
ferring it to a Target TV. The Master TV's clonable features need to be
configured as part of the Commercial Mode Setup. This is a critical step.
If the Master TV's clonable features—channel icons or labels, digital font
options, etc.—are not set up correctly, the cloned TVs will all have prob-
lems. Pages 27 to 32 provide detailed information on cloning require-
ments and procedures.
Installing Batteries in Installer
Remote
•
Open the battery compartment cover on the back side of the remote.
•
Install two high-quality alkaline 1.5V AAA batteries. Never mix old
or used batteries with new ones. Install batteries matching correct
polarity as shown (+ with + and - with -).
•
Replace the battery compartment cover.
10
XXLD320H PTC INSTALLER MENU
000 INSTALLER SEQ
UPN 000-000-000-000 FPGA E0F1
PTC V1.00.000 CPU V3.06.00
Typical Installer Menu
ALARM TIMER INPUT
TV
1 2 3
4 5 6
7 8 9
0
FLASHBK
INFO
i
P
CH
VOL
A
PORTAL
G
E
MUTE
GUIDE
MENU CC
ENTER
RETURN
SAP EXIT
EJECT
RATIO
000
206-4163