Learning An Fma Configuration File From A Tv - LG 32LD330H Owner's Manual

Learning an FMA Configuration File from a TV

To ensure that Pro:Idiom decryption is enabled, it is recommended that you create an FMA Configuration file
using the FTG Configuration Application as described on page 31. However, if necessary, this option
enables you to save (Learn) an FMA Configuration file from an LD340H/LD343H/LD345H TV to a USB
memory device.
Note: If the LD340H/LD343H/LD345H TV is NOT already in FTG Mode, you
may need to perform some manual configuration on the TV before you start this
procedure (see "Optional Manual Configuration / Setup for a TV" on following
page).
1. Plug a USB memory device into the USB IN port on the TV.
2. Press MENU to display the TV setup menus, use the arrow navigation keys to
select/highlight either the Option (if TV is in Pass-through Mode) or Lock (if
TV is already in FTG Mode) menu icon, and then press the number "7" key a
total of seven times to display the USB Download Menu.
3. To gain access to the Learn From TV options in the USB Download Menu, key
in the password used to enter the Installer Menu (Example: Press 9-8-7-6).
4. Use the Up/Down arrow keys to select Learn From TV (FMA), and then press
ENTER.
5. To identify the file from others, you can use the Up/Down arrow keys to
change the last five digits of the filename. Press ENTER when you are ready
to initiate Learning.
The TV will show Learning completion progress in a new window. Do NOT
remove the USB device until Learning is complete. When Learning is complete,
the USB Download Menu will reappear on screen.
6. When you are finished, remove the USB memory device.
Note: It is highly recommended that you open this FMA
Configuration file in the FTG Configuration Application—BEFORE
transferring (Teaching) the file to any TVs—to verify FTG Channel
Map and FTG Installer Menu settings and enable Pro:Idiom decryp-
tion by marking Encrypted channels. This will also enable you to
confirm and add channel attributes, labels, etc.
206-4186
FTG Mode via CPU (Cont.)
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (FMA)
Learn From TV (TLL)
Learn From TV (FMA)
Return
Learn From TV (FMA)
Select the file name and press OK to start
xx0BAL-PLAT200001.FMA
Return
!
Learn From TV
UPDATING...
Do not unplug!
Enter
Enter
25%
33