Installer Remote Control Typical Key Functions - LG 32LD330H Owner's Manual

The LG Installer Remote illustrated below and throughout this document shows typical remote control functions and
is provided for reference only. This Installer Remote may vary from the Installer Remote supplied with the TV.
Turns TV ON or OFF.
Sets the time when the TV
will automatically turn itself ON.
Sets the amount of time before the TV
automatically turns itself OFF.
Selects RGB, HDMI/DVI1, HDMI2,
Component Input, AV1, and AV2 sources.
Returns to the last TV channel
(from an Aux input).
VOLUME UP/DOWN
Increases/decreases sound level.
Displays channel information.
Displays and removes the interactive
Switches sound ON or OFF.
CHANNEL/PAGE UP/DOWN
Changes the channel. Moves from one
full set of screen information to the
Color buttons access special functions
in some menus.
DVD/VCR BUTTONS
Controls some DVD players or
video cassette recorders.
Ejects a USB memory device, CD,
DVD, VHS tape, as applicable.
206-4186

Installer Remote Control Typical Key Functions

POWER
ALARM
ALARM TIMER
TIMER
1
INPUT
4
TV
7
INFO
VOL
PORTAL
menu.
MENU
MUTE
next.
RETURN
RATIO
EJECT
INPUT
TV
2 3
5 6
8 9
0
FLASHBK
INFO
i
P
CH
A
PORTAL
G
E
MUTE
GUIDE
CC
ENTER
SAP EXIT
EJECT
* SAP notes:
•
•
•
NUMBER Buttons (0 - 9) & DASH
Use to enter a program number or channel.
Dash is used for sub-channel numbers such
as 2-1, 2-2, 9-1, 9-2, 100-3, 100-4, etc.
FLASHBK (FLASHBACK)
Returns to the previously tuned channel.
Arrows (Up/Down/Left/Right) & ENTER
Use to navigate on-screen menus and
adjust TV settings to your requirements.
MENU
Displays the TV setup menus on the screen.
Also exits the on-screen menu system and
returns to TV viewing.
GUIDE
Displays and removes the electronic
program guide.
CC
Press to activate subtitles.
BACK
Returns one level to the previous menu/
display.
SAP
Analog Mode: Selects MTS sound (Mono,
Stereo, or SAP). DTV Mode: Changes
audio language, if additional languages are
available. *
EXIT
Clears all on-screen displays and returns to
TV viewing.
RATIO
Adjusts the picture aspect ratio.
If SAP is selected and no SAP is provided, sound
may not be heard on channel.
Each analog channel may have its own SAP setting.
Digital channels will reset to default audio language
with a power off/on.
11