Device - LG 32LD330H Owner's Manual

Reference: Upgrading TV/PTC Software using a USB Memory Device
Checking the Software Versions
You can check the software versions of the TV by
accessing the Installer Menu with the Installer Remote:
Press MENU repeatedly until the on-screen setup
menus lock up, and then press 9-8-7-6 + ENTER.
When you are finished, press ENTER again to exit the
Installer Menu.
Upgrading TV/PTC Software
Before you begin, note that the software upgrade files must be stored in a folder
named "LG_DTV" in the root directory of the USB memory device. Also, ensure
the USB device has been formatted with FAT format.
Note for TV Software Upgrade only: If the TV detects a later version of software
on the USB device, it will automatically display a dialog from which you can start the
software upgrade immediately. Otherwise, you can close the dialog, and access the
USB Download Menu as described below.
1. Turn the TV ON.
2. Plug the USB memory device into the USB IN port on the TV.
3. Press MENU on the Installer Remote to display the TV setup menus.
4. Use the arrow navigation keys to select/highlight either the Option (if TV is in
Pass-through Mode) or Lock (if TV is in FTG or LodgeNet PPV Mode) menu
icon; then, press the number "7" key a total of seven times to display the USB
Download Menu.
5. Use the Up/Down arrow keys to select Upgrade TV Software or Upgrade
PTC Software, as applicable, and then press ENTER.
6. Select the appropriate option(s), depending on the type of upgrade you are
performing:
• TV Software Upgrade: (See screen samples at right.) Select TV Software
Update from the first TV Software Update window. In the second TV Soft-
ware Update window, select the update file to install and press ENTER.
Note: Do not select Forced Update options unless you have been specifically
instructed to do so or have previous experience with Expert Software Updates.
• PTC Software Upgrade: In the PTC Software Update window, select the
update file to install and press ENTER.
Note: The PTC Software Update window is similar to the second TV Soft-
ware Update window, though there are no Forced Update options. Current
software version information is shown at the top and update files on the USB
device are listed at the bottom of the window.
The TV will show update completion progress in a new window. Do NOT remove the USB device
until the software upgrade is complete. When a TV software upgrade is complete, the TV will reset
itself with an automatic restart. When a PTC upgrade is complete, the TV will turn OFF.
38
Typical TV
Installer Menu
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.001
PTC Version
TV Software Update (Expert)
The following update files are found in the USB device.
Select the file you want to apply to update this TV
or press EXIT to cancel the update.
TV Software Update
LOGO Image Download
TV Software Update (Expert)
The following update files are found in the USB device.
Select the file you want to apply to update this TV
or press EXIT to cancel the update.
TV Software Update
LOGO Image Download
xxLD330H PTC INSTALLER MENU
000
ASIC 20E7
CPU V3.06.00
CPU Version
USB Download Menu
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLL)
Teach To TV (FMA)
Return
TV Software Update (Expert)
TV Software Update (Expert)
The following software files are found in the memory card.
Select the file you want to download to this TV
or press EXIT to cancel the update.
The following update files are found in the USB device.
Select the file you want to apply to update this TV
or press EXIT to cancel the update.
TV Software Update
Splash Image 1366 X 768 ProCentric
LOGO Image Download
TV Software Update (Expert)
TV Software Update (Expert)
[ Current TV Software Version Information ]
EPK : 03.23.00
The following software files are found in the memory card.
The following update files are found in the USB device. Select the file you want to download to this TV
Select the file you want to apply to update this TV or press EXIT to cancel the update.
or press EXIT to cancel the update.
EPK : 03.25.00
[ Forced Update Option ]
Ext. MICOM SPI Boot
TV Software Update
LOGO Image
xxLD330H_v1_11_RevNo1000_USB LOGO Image Download
Upgrade PTC Software
[ Current PTC Software Version Information ]
TXT : V1.00.00
The following software files are found in the memory card.
Enter
TV S
The followin
Select the fil
or press EXI
Splash I
TV S
[ Current T
EPK : 03.
The follow
Select the
or press E
EPK : 03.
[ Forced U
Ext. M
LOG
xxLD330
Upg
[ Current
TXT : V1.
206-4185
The follow