Alarm Setting - JVC V.NETWORKS VN-C30U Instructions Manual

Alarm setting

The alarm settings determines the actions to be performed when an alarm
signal is received from Alarm 1 or Alarm 2 input of VN-C30U.
There are four functions as follows:
• Message
Pop-up the message entered in the text box.
(There is a limit on how many characters that can be displayed.)
• Recording
Start recording the images.
• Playing wave file
Play a specified wave file . Any wave files can be specified from the
Browse button.
• Execute application file
Execute a specified application file. Any execute (.exe) files can be
specified from the Browse button.
Select Settings from the menu, then
select Alarm Settings.
Select Non-Stop or Stop in 1
minute after the recording
starts,
Stop in 1 minute is used for
saving space on the hard disk.
When Stop in 1 minute is
selected, normal recording
specified on the controller
software also stops in 1 minute
after the alarm is received.
45