Changing Position Memory - JVC V.NETWORKS VN-C30U Instructions Manual

Changing position memory

3
Caution
• When the zoom scroll bar is set to the Tele end, the lens position may
not be the same after changing its position.
44
1
Select Setting from the menu and then
select Position Memory.
2
P r o c e d u r e f o r P o s i t i o n
memory change
1 Use the position memory
2 Press one of these memory
3 Press OK to close the
buttons, Pan/Tilt/Zoom
setting and lens setting to
set the status in position
memory.
buttons in which the status
s e t i n s t e p 1 i s t o b e
memorized.
position memory setting
window.