Table of Contents
Advertisement
The Alarm 1 and Alarm 2 settings
determine whether or not the
alarm function on Alarm 1 and
Alarm 2 are effective (ON or OFF).
When ON is selected, "Alarm
Output" (to send a signal to Alarm
out) and "Go to a preset position"
(one of the 10 preset positions) are
available.
For camera preset positions, see
"Position Memory Settings" on
page 44.
Caution
When Relay Alarm is set, following alarm operations will not activate.
Example: If relay alarm is generated in the order of Alarm 1
the operating mode becomes: Operation of Alarm 1
alarm, and operation of Alarm 2 itself will not be executed.
When the Alarm 1 and Alarm 2
receive signals in sequence, use
the Relay Alarm Function to make
the different settings from the
above mentioned Alarm 1 and
Alarm 2 settings.
Place a check beside Use Relay
Alarm and specify the alarm
occurrence sequence and the
time interval.
When a relay alarm is generated,
the alarm output and movement
of the camera to the preset
position can be controlled using
check boxes and scrollbars.
Alarm 2,
Operation of relay
27
Advertisement
Table of Contents
