Page of 1

Jvc VN-C3 Schematic Diagram

V.net device standard.
Hide thumbs
   
MM
S0L0006-01
Model Name: VN-C3 ( a sample procedure for mounting the VN-C3 to a wall using the VN-BK30 )
Dimensions
105
104
VN-C3 Sample Mounting Procedure
In order to mount this model perform the steps detailed below ( using the mounting kit VN-BK31 )
1. Secure the wall-mounting bracket to the wall using the
mounting screws M4 ( 4 ) .
2. Using screws of M4 or larger or hexagon head bolts ,
fix the fall-prevention wire to a secure place ( See. Notes 2 ) .
3. Connect both the signal and power supply cables to the main body of the camera.
4. After connecting the camera to the appropriate cables ,
secure it to the wall-mounting bracket by using the provided screws M3 x 8 ( 3 ) .
Size of the mounting hole
105
83.5
Notes
1. Make sure that the wall is strong enough to endure more than 10 times the weight of the camera and the mounting kit.
If the wall is judged not to be strong enough , make sure that some kind of reinforcement is used.
2. We recommend the use of a fall-prevention wire. Take the entire weight into consideration and use a wire strong
enough to withstand 10 times the weight of the camera and the mounting kit.
V.NET Device Standard Mounting Manual
147.5
95
104
Wall-mounting bracket
Front of the camera
Camera mounting screws
( M3 x 8 ) at 3 locations
Positions of the screw holes ( 4 locations )
Main body of the camera
( VN-C3 )
20 ( The hole which penetrates the wall for a cable pass. )
Situations in which it is possible to drill holes in a wall
1/1
( Main body of the camera )
Mass: 0.73 kg
( Fixtures )
: 0 , 27 kg
Total Mass: 1.0 kg
Materials
Screws
M4 small screws or
M4 hexagon head bolts and nuts
Quantity
4
Bracket mounting screws ( M4 , 4 places )
*Not included in this package
Mounting side of the wall
Fall-prevention wire
*Not included in this package
For further information ,
contact the JVC Optical Communications Division.
Locations where the cables exit
( 2 ways )
KOBAN box

Comments to this Manuals

Symbols: 0
Latest comments: