Motion Detection Setting; Alarm Setting - JVC VN-C205 Instructions Manual

Settings (Step 2 Network Settings)
2-4 Other Settings Using the "VN-C205U Setup Tool" (4. Alarm Setting)
This section describes procedures for alarm setting.
Alarm Input
• When there is an input of signals to the alarm input terminal on the ceiling mount.
☞
( Page 18 "Alarm Input Terminal")
☞
• When motion is detected. ( Page 38 "Motion Detection Setting")
Operation when an alarm input is activated
• Output signals are sent from the alarm output terminal on the ceiling mount.
☞
( Page 19 "Alarm Output Terminal")
☞
• Alarm packets are sent to the PC. ( Page 42 "Message Packet")
• Images are uploaded to the FTP server. (
☞
• Quits all operations. ( Page 42 "Shutdown")
1.
Start up the "VN-C205U Setup Tool" and select [Alarm].
40
☞
Page 50 "FTP Client Setting").
1
2
3
4
2.
Click the [Other Triggers] tab on the [Alarm Setting] screen.
3.
When setting is complete, click
4.
Click the [Alarm Output] tab on the [Alarm Setting] screen.
5.
When setting is complete, click
5
4
followed by .
6
7
4
followed by .
41