Alarm Setting - JVC VN-C3U - V-networks Pan/tilt/zoom Camera Instruction Manual

Alarm setting

The alarm settings determines the actions to be performed when an alarm
signal is received from Alarm 1 or Alarm 2 input of VN-C3U. Make sure to
select "ON" in Alarm 1/Alarm 2 setting of V.NETWORKS setup tool (refer to
page 21) to enable all the Alarm settings in this page.
There are four functions as follows:
• Message Pop-up
Pop-up the message entered in the text box. Up to 100 letters can be
entered.
• Recording start
Start recording the images.
• Play a wave file
Play a specified wave file . Any wave files can be specified from the
Browse button.
• Execute a program file
Execute a specified program file. Any execute (.exe) files can be specified
from the Browse button.
Select Settings from the menu, then
select Alarm Settings.
37 00.4.7, 5:35 PM