Switching On And Setting The Time - Roberts CR9951 Manual

Switching on and setting the time

Before using your clock radio you must first set the correct time.
1. Check that the supply voltage agrees with the voltage indicated
on the rating plate on the bottom of the product. Place the unit on a
flat surface. Plug the power cord into the wall socket and switch
on.
2. The clock display will flash 12:00.
3. Press and hold down the Time Set button.
4. Whilst holding down the Time Set button press the Hour, or
Minute buttons to set the time. Release the buttons when the
correct time is reached. The clock uses a 12 hour display with a
PM indicator. Ensure that the correct 12 hour cycle is selected.
3