Switching On And Setting The Time - Roberts CR9961 User Manual

Switching on and setting the time

Before using your clock radio you must first set the correct time.
1. Place the unit on a flat surface. Plug the mains lead into a wall socket
and switch on the wall socket.
2. The clock display will flash 12:00. Ensure that the Function switch
is set to the 'Off' position.
3. Press and hold down the Time button.
4. Whilst holding down the Time button press the Hour or Minute
buttons to set the correct time. Release the buttons when the
correct time is reached. The clock uses a 12 hour display with a PM
indicator. Ensure that the correct 12 hour cycle is selected.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
2
4 4
3
5