JUKI IP-200 Setup Manual page 12

d
Screen during data deletion
If the screen below is displayed, quickly
turn OFF the power and perform the
set-up again after checking [Checking
items] below.
Data writing abnormal screen
Checking items
1 Smart media cover is opened during the data communication from the smart media.
2 Data of the smart media is not correct. Or, there is no data file.
3 Contact of the smart media is dirty. Contact is defective.
Do not turn OFF the power and close/open the smart media cover during the work.
The main unit may be broken.
Screen 1 during data writing
– 10 –
Screen 2 during data writing
d
End screen
The procedure above
completes the replacing work
of application software.