Advertisement
Quick Links
Advertisement
Related Manuals for JUKI DDL-8000CS
Summary of Contents for JUKI DDL-8000CS
- Page 1 DDL-8000CS Single-touch Presser Foot Kit INSTRUCTION MANUAL...
- Page 2 CONTENTS 1. General ............................ 1 2. Single-touch presser foot kit parts list ................1 3. How to assemble ........................2 3-1. Removing the face plate ......................2 3-2. Removing the presser foot ......................2 3-3. Removing the presser bar bracket ....................3 3-4. Installing the presser bar (asm.) ....................3 3-5.
- Page 3 1. General The single-touch presser foot kit is an optional parts kit that allows you to easily replace the presser foot. 2. Single-touch presser foot kit parts list Single-touch presser foot kit parts number : 40299038 ・List of parts supplied with the machine Parts No.
- Page 4 3. How to assemble WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work after turning the power off and ascertaining that the motor is at rest. 3-1. Removing the face plate 1) Loosen the three setscrews ❷...
- Page 5 ❸ ❸ ❹ ❹ 1) Apply JUKI Grease A to the periphery of the presser bar (asm.) ❹ . 2) Attach the presser bar (asm.) ❹ and then install presser bar oil-proof rubber ❸ , O-ring ❷ , presser bar bracket ❶...
- Page 6 3-5. Installing the single-touch presser foot joint 1) Face the groove in the presser bar (asm.) ❸ to- ward the operator, and then firmly attach the joint (asm.) ❹ all the way in. ❸ ❸ 2) Attach presser foot ❷ to the joint (asm), and then adjust the position by rotating the presser ❹...
- Page 7 4. How to replace the single-touch presser foot kit WARNING : To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work after turning the power off and ascertaining that the motor is at rest. 4-1.
- Page 8 6) Once the joint (asm.) ❷ and presser foot ❶ are assembled in step 2, align the pin ❻ of the ❼ ❼ single-touch presser foot to be replaced with the ❻ ❻ groove in the presser bar ❼ , and then insert ❷...
Need help?
Do you have a question about the DDL-8000CS and is the answer not in the manual?
Questions and answers