Setting The Sewing Recorder Function - JUKI IP-110 Instruction Manual

2-4. Setting the sewing recorder function
"!. 2-2 Information mode"
* Refer to
The operation and the display-related basic items of the sewing recorder function can be set on the
<Sewing recorder function setting screen> under the information mode.
<Sewing recorder function setting screen>
Input data on items 1 and 2 referring to the table given below.
When Enter switch 3 is pressed, the input data is confirmed. When Cancel switch 4 is pressed, the
input data is cancelled and the screen is restored to the previous screen.
No. Item to be set
Data sampling time
1
The upper limit of the
2
vertical axis (the number of
revolutions) of graph
for the operating procedure to be taken until this screen is displayed.
1 2
1
2
The time interval during which the number of revolutions of the sewing machine is
measured and recorded is set.
Set value : 0.05, 0.10, 0.50, 1.00, 1.50, 2.00 (sec)
Initial value : 0.10 (sec)
* Data over the time interval specified by the set value "0.05: 25 minutes," "0.10:
50 minutes," "0.50: 250 minutes," "1.00: 500 minutes," "1.50: 750 minutes," or
"2.00: 1000 minutes" can be stored in memory of the sewing machine. When
the memory capacity is exceeded, the oldest piece of data is erased to store the
latest piece of data at all times.
* The accuracy of the graph plotted on the IP depends on the time interval set
vale.
The upper limit of the graph displayed on the sewing recorder screen No. 2 is set.
Set value : 6000, 9000 (sti/min)
Initial value : 6000 (sti/min)
* On the sewing recorder screen No. 2, the graph can be used under the auto
range mode or by setting an arbitrary range in increments of 1000 (sti/min) not
more than the upper limit.
– 13 –
Cancel switch 4
Enter switch 3
Description