Operating The Production Management Function; Production Management Screen No. 1 - JUKI IP-110 Instruction Manual

4. Operating the production management function

The production management screen has two different screens, i.e., the screen No. 1 for displaying infor-
mation on production volume produced by sewing work, and the screen No. 2 for setting the operation
for the screen No. 1.

4-1. Production management screen No. 1

On the production management screen No. 1, the target production volume according to the working
hours and the actual production volume are displayed to notify the operator of a delay or progress of
sewing work in real time. With this function, the operator is able to carry out his/her work while checking
his/her work pace. This enhances his/her motivation to achieve his/her goal, thereby leading to a sub-
stantial increase in productivity.
<Production management screen No. 1 (Operation switch>
Actual production volume clear switch 3
Production volume count-up switch 1
The target production volume setting switch 2
<Production management screen No.1 (displayed information)>
C. Actual production volume display
D. Delay/progress display
A. Display of method to calculate
the target production volume
Measurement stop switch 4
Display changeover switch to display the production
management screen No.2 5
B. Target production volume display
H. Daily target production volume display
– 31 –
E. Target pitch time
display
F. Latest pitch time
display
G. Achievement ratio display
Production
volume counter
correction switch
6