JUKI SC-910N Instruction Manual page 8

!0
!1
C
B
10) Fx all cables comng from the machne head
[ Connection of the connector for CP panel ]
Exclusve connectors are prepared for connecton of
the connector for CP-170.
Payng attenton to the orentaton of the connec-
tor, connect t to connector B located on the crcut
board. After connecting, securely lock the connector.
[ Connecting for IP panel ]
The connector for connectng IP-110 s prepared.
When connectng, nsert the connector untl t s
locked to C.
11) After nsertng the connector, put all cords to-
!3
!2
(Caution) 1. Fix the cord clamp and the cable
!4
– 6 –
wth cable clp band !0 attached to te-mount !1 .
gether wth cable clp band !2 located on the sde
of the box.
At ths tme, bundle the connectors whch are
arranged above the wre saddle to wre saddle
!3 and those whch are arranged below the wre
saddle to wre saddle !4 .
clip band following the attaching
procedure.
2. When removing the connector, re-
move it from the wire saddle and
remove it while pressing the hook
of the cable clip band.