Connecting The Connectors - JUKI LZ-2290A-SR/IP-110D/SC-916 Instruction Manual

(2) connecting the connectors

• Each connector has the inserting direction. check the direction and securely insert it.
(In case of the type with lock, insert up to the lock.)
• If the connector is forcibly inserted, trouble or accident will be caused.
• Never pull out the connectors inserted at the time of delivery.
• the sewing machine fails to work if the connectors are not properly inserted. Not only
the problem such as the error warning or the like but also breakage of the sewing
machine or electrical box will occur.
B
1
b
2
B
3
B
5
B
7
a
c
10
Connect cords in the following order.
5) Insert yellow/green earth cord 1 coming from the
6) Insert white square connector 9P black cord
4
7) Insert white connector 4P black cord 5 coming
6
8) Insert white connector 26P cord 7 coming from
d
8
machine head inside the electrical box through
front cover through hole B, and pass it through
cord clamp "b" as illustrated and tighten it with
screw at the position 2 in the illustration.
3 coming from the machine head inside the
electrical box through front cover through hole B,
and insert it into connector CN38 4 of the circuit
board attached to the front cover.
from the machine head inside the electrical box
through front cover through hole B, and insert
it into connector CN21 6 of the circuit board
attached to the front cover.
the control panel inside the electrical box through
front cover through hole B, pass it through cord
clamps "a", "c" and "d", insert it into connector
CN34 8 , and lock it.