Pattern Stitching; Setting The Pattern Stitching - JUKI LZ-2290A-SR/IP-110D/SC-916 Instruction Manual

6-12. Pattern stitching

standard delivery level of the key lock is "1". When the level of the key lock is the case
other than "0", be sure to change the level to "0" to perform the operation below.
The respective shapes of straight stitch, 2-step zigzag, 3-step zigzag, 4-step zigzag, scallop, blind stitch, T
stitch, patterns 1 to 4 and custom can be registered in the pattern.
Patterns, the zigzag width of which is different from each other, and those, the positions of the stitch base
line of which are different from each other can be changed over and used without re-setting the data even in
case of the same zigzag shape by registering as patterns. Continuous stitching or cycle stitching can be set
by using the registered pattern.
It is possible to register as many as 99 patterns.

(1) setting the pattern stitching

Example) scallop stitching
the second screen of the sewing shape list
Pattern selection pop-up screen
q
w
1) Select 1 in the
second screen of the
sewing shape list.
2) Press switch 2
corresponding to the
sewing which has been
registered, or the pattern
you desire to edit in the
pattern selection pop-up
screen.
3) Press to display the
sewing shape setting
screen.
87