T Stitch, Left - JUKI LZ-2290A-SR/IP-110D/SC-916 Instruction Manual

(5) t stitch, left

sewing shape list second screen
1) Select T stitch, left sewing 1 in the sewing shape list second screen.
2) The selected shape reverses and is indicated on the left end of the screen.
3) Press to display the sewing shape setting screen.
sewing shape setting screen
● First screen
● second screen
the feed amount cannot be set to 0 and the t
stitch pattern may be deformed due to materials,
height of fed dog or gauges. (2nd stitch does not
correspond with 4th stitch.)
In this case, perform compensation with switch
3 "setting of the compensation amount of seam
section at feed amount "0"" to make the stitches
correspond with each other.
setting of the zigzag width
¡
Change the zigzag width with +/– of switch 1 .
setting of the position of stitch base line
¡
Change the position of stitch base line with +/– of switch 2 .
1
1 2 3 4
1 2 3 4 5
6 7
6 7 8
1
3
2
4
Correspondence
1
–
3
2
4
+
61