JUKI LZ-2290A-SR/IP-110D/SC-916 Instruction Manual page 89

reverse feed stitching setting screen
The second screen of the reverse feed stitching setting is explained, taking the example of the input of con-
densation custom at sewing start (width 4mm for 2-step zigzag stitch).
Example) condensation custom at sewing start Width 4 mm for 2-step zigzag stitch
Needle
2
entry
Input
value
Feed
amount
1 Input the data of the list in the condensation custom edit screen.
2 Set 4 mm at 1 in the 2nd screen of reverse feed stitching setting.
* By changing at 1 , the inputted needle entry (width shown at 2 ) can be enlarged/reduced.
When the power source is turned oFF without pressing
to the former one. When you desire to determine the data, be sure to press
the feeding directions of the condensation custom patterns are all in the reverse feed
directions.
86
q
q
1th 2th 3th 4th
stitch stitch stitch stitch
-2.0 -0.7 0.6
0.1 0.1 0.1
5th 6th 7th
stitch stitch stitch
2.0 0.6 -0.7 -2.0
0.1 0.1 0.1 0.1
8th 9th 10th
stitch stitch stitch
-0.7 0.6 2.0
0.1 0.1 0.1
key, the inputted data returns
key.
11th
stitch
END