Replacing Power Supply Modules; User-Replaceable Power Supply Modules; Dual Dc, Part Number 850-10954-2Dc - IMC Networks iMediaChassis/20 Operation Manual

Imediachassis series

Hide thumbs Also See for iMediaChassis/20:

Table of Contents

Replacing Power Supply Modules

While power supply modules are redundant *, failed power supply modules should

promptly be replaced to maintain network integrity and prevent data loss.

To replace a power supply module:

Disconnect the power source from the power supply module.

Remove the screws of the retainer plate (on some AC modules).

Move the Power Supply Release switch toward the right or unscrew captive

release screw.

Before grasping the power supply module by the silver handle, press the release

screw and then slide out of the chassis (Power supply modules are hot-

swappable).

Install new power supply module. If module is equipped with an ON/OFF

switch install the module with the switch in the OFF position.

Table of Contents

Do you have a question about the iMediaChassis/20 and is the answer not in the manual?

3 6 Imediachassis/3 Imediachassis/6 20