Utilities; Power/Control - HP MicroServe User Manual

4. Click the Upload button. If the file is valid, all other sessions will be terminated and the image
upload will begin. If the upload fails, a message will notify you to upload another file. For a
successful upload, the current firmware version and the version of the new file will be displayed,
as well as the Preserve Configuration checkbox, Update button and Cancel button.
5. Click the Update button to begin the firmware update process and view the update status. When
the update is completed, the embedded software will reboot automatically. If you click the Cancel
button, the process will be terminated and the embedded software will reboot.

Utilities

Reboot: Click 'Reboot' button to reboot the System.
Factory Default: Click 'Factory Default' button to reset System to default.

Power/Control

On the main menu navigation bar, click power, the Power control screen displays current power
status.
To modify power control, select the operation you wish and click Apply Changes.
43