Logging In To Bmc Web For The First Time - HP MicroServe User Manual

8. Press the F10 key to save and exit RBSU.
9. With IP address, use SSH to log in to the remote management CLP, or use a web browser to
access the HTML interface.

Logging in to BMC Web for the first time

BMC is configured with a default user name and password.
1. BMC is connected to the network through a NIC port (RJ45) on the Remote Access Card. If you
want to access BMC via LAN, you need to connect the BMC LAN port and the switch via a
network cable.
2. Get "BMC LAN configuration" from the RBSU
3. Use these values to access BMC remotely from a network client using a standard Web browser
via the IP address of BMC.
13