HP MicroServe User Manual page 30

IPV4 Settings
Use DHCP: DHCP Server is the IP address of the DHCP server. This field cannot be assigned. It is

received from DHCP if DHCP is enabled.
Subnet Mask: Use the subnet mask parameter to identify the subnet mask for the IPMI Port.

IP Address is the BMC IP address. Use this parameter to assign a static IP address to BMC on

your network. By default, the IP address is assigned by DHCP
Gateway displays the IP address of the network gateway. If DHCP is in use, the Gateway s

automatically supplied. If not, enter the network gateway address.
IPV6 Settings
The following options are available to configure IPv6 environment
Auto Configuration: Lets the server administrator to obtain the IPV6 address from the DHCP

server
30