Table of Contents
Advertisement
Network Security
This page includes four fields for network security values. If you have the Administrator or Operator
privilege level, you can modify the values and click the apply changes button to execute the change.
The new values are available to the firewall immediately, but may not be utilized until the next
security event occurs.
IP Blocking enabled: Enables/disables the IP address blocking feature, which limits the number of
failed login attempts from specific IP address for a pre-selected time span.
IP Blocking Fail Count: Sets the number of login failures attempted from an IP address before the
login attempts are rejected. The range is 2 to 16.
IP Blocking Fail Window: Determines the time span (in seconds) that IP Blocking Fail Count
failure must occur to trigger the IP Blocking Penalty Time. The range is 10 to 65535 seconds.
IP Blocking Penalty Time: Set the time span (in seconds) that login attempts from an IP address
with excessive failures are rejected. The range is 10 to 65535 seconds.
Security
Below is how to update certificate by WEB-GUI.
1. On the main menu navigation bar, click configuration -> Security.
Click "Generate Certificate" button to generate Certificate request file (CSR file).
2.
32
Advertisement
Table of Contents
