Properties; Configuration; Network - HP MicroServe User Manual

Properties

This section provides current Firmware Version.

Configuration

The drop-down list of configuration page consists of six different categories: Network, Network
Security, Security, Users, Services and IPMI. You can click help link on each page to get the purpose
of every field

Network

The Network Settings enable you to view and modify network settings for BMC. Only users with
Administrator or Operator privilege level can change these settings. Users that do not have these
privileges can view the assigned settings.
Network Settings
The Network page displays the NIC setting, Common settings about DNS, IPV4/IPV6 settings and
VLAN setting. From the Network screen, you can configure network environment for servers by IPV4
setting or IPV6 settings. All users can view the network settings, but only users with the settings
privilege can change these settings. To access network page, click configuration->network. The
network page appears with the following five tabs information and settings:
Trap Settings
Email Settings
Virtual KVM & /
Virtual Media
messages that it receives
Enables you to specify
destination addresses, and
enable/disable SNMP alerts
Allows to enable email alert and
specify email address to receive
alert message
Accesses virtual media or the
remote graphic console
28