HP MicroServe User Manual page 29

Network Interface Card Settings
NIC Selection enables to select which LAN port to use. The default value is "dedicated".

MAC Address identifies this unique device on the network

Auto Negotiation toggles on/off the auto negotiation of the connection speed and duplex mode.

This is only applies if it is in dedicated NIC mode.
Network Speed enables to set the network speed to 10Mb or 100Mb to match your network

settings.
Duplex Mode enables you to set the duplex mode to full or half to match your network settings.

Common Settings

Enable Dynamic DNS allows registering the ProLiant MicroServer address with the DNS when

enabled.
Host Name-- when registering the ProLiant Micro Server with the DNS. The character set is a-z, A-

Z, 0~9, underscore (_) and dash (-), using between 0 and 64 characters and no white space, if
unspecified, the default name is MergePoint-EMS.
Use DHCP to obtain DNS Domain Name can be used to enable or disable the DHCP to acquire

the DNS Domain name.
29