HP Data Protector A.06.11 Integration Manual page 234

1. Verify the Data Protector SAP ZDB configuration on the application system:
Execute the following command:
HP-UX :/opt/omni/lbin/util_sap –CHKCONF ORACLE_SID
Windows : Data_Protector_home\bin\util_sap.exe –CHKCONF
ORACLE_SID
If an error occurs, the error number is displayed in the form
*RETVAL*error_number.
To get the error description, on the Cell Manager, run:
Windows: : Data_Protector_home\bin\omnigetmsg 12 error_number
which is located on the Cell Manager.
HP-UX, Solaris: /opt/omni/lbin/omnigetmsg 12 error_number
2. Verify the SAP user.
Check that the respective user group has the See Private Objects user
right selected. Also refer to
3. On the application system, verify the backup using testbar2:
Execute the following to ensure that communication within Data Protector is
established:
• Create a non-ZDB backup specification on the application system.
• Run:
/opt/omni/bin/testbar2 –type:SAP –appname:ORACLE_SID
–perform:backup –file:file_name -bar barlist_name
If it fails, check the errors and try to fix them or call a support representative for
assistance.
234 Data Protector SAP R/3 ZDB integration
"Configuring user accounts" on page 175.