HP Data Protector A.06.11 Integration Manual page 382

a. Right-click a storage group, a store, or logs and click Restore as.
b. In the MS Exchange additional options dialog box, select the target location
for the components you want to restore: target server, target storage group,
and target stores. The following options are available:
• Restore to a different store
• Restore to a non-Exchange location
• Restore to a non-Exchange location and create RSG
By default, the storage group is restored in the C:\Omni directory. To select
another location use the Restore into location option. Click Browse and
select the desired location.
IMPORTANT:
The selected directory must be either empty or you can specify to create
a new directory. If the directory is not empty, the restore session fails.
Note that you can only specify the restore location for the storage group
and not for a specific store.
382 Integrating the Data Protector ZDB integrations and Microsoft Volume Shadow Copy Service
This option is selected by default.
Select this option to select the target stores for each store to be restored
(original stores). First, select the target system from the Target server
name drop-down list, and then choose the desired pairs of stores by
selecting entries in the Original and Target drop-down lists. Note that
only stores cannot be restored, so logs are automatically selected in the
restore session to different location.
Select this option to restore your data to a non-Exchange location. In
this case, the restored data will not be managed by Exchange Server
and a Recovery Storage Group (RSG) will not be created. You can
manually create an RSG after the restore session completes. First, select
the target system from the Target server name drop-down list, and then
choose the desired stores using the Original drop-down list.
Select this option to restore your data to a non-Exchange location. After
restore, Data Protector will create a Recovery Storage Group called DP
RSG on the target server. The selected stores and logs will be restored
to this recovery group. First, select the target system from the Target
server name drop-down list, and then choose the desired stores using
the Original drop-down list.