Installing Onboard Administrator Modules - HP BladeSystem c7000 Setup And Installation Manual

To remove a fan, turn the handle counterclockwise to the unlock position, and pull the fan out of the
enclosure.

Installing Onboard Administrator modules

The HP BladeSystem c7000 Enclosure is shipped with one HP BladeSystem Onboard Administrator with
KVM module installed and can support up to two Onboard Administrator modules. Install Onboard
Administrator modules based on the total number ordered:
•
One Onboard Administrator module: Bay 1
•
Two Onboard Administrator modules: Bays 1 and 2
Install an Onboard Administrator blank in an unused Onboard Administrator bay.
NOTE:
is active and the module installed in Bay 2 is redundant.
To install an Onboard Administrator module:
Remove the Onboard Administrator blank, if present.
1.
Press the button on the front of the blank to release the handle.
a.
When two Onboard Administrator modules are installed, the module installed in Bay 1
Installation 44