Mapping half-height blades
The following table lists the available configurations for half-height devices installed in device bay N (1–16).
Connection
Embedded NIC
Mezzanine slot 1—1x or
2x cards
Mezzanine slot 1—4x
cards
Port number
Connects to interconnect
bay/port
NIC 1
1/Port N
NIC 2
2/Port N
1x/2x port 1
3/Port N
1x/2x port 2
4/Port N
4x port 1
3/Port N
Comments
One or two single-wide
Ethernet interconnect modules
•
One single-wide
interconnect module
•
Four port cards will only
connect the first two ports.
•
One double-wide
interconnect module
•
Only port 1 of a two port
card will be connected.
Installation 49