HP BladeSystem c7000 Setup And Installation Manual page 47

IMPORTANT:
installation does not coincide with the mezzanine card installation, the ports on the interconnect
module will not function.
NOTE: For more information on how and where to install mezzanine cards, see the
server-specific user guide.
To install an interconnect module:
Remove the interconnect blank, if applicable.
1.
If you are installing a double-wide interconnect module, remove the interconnect bay dividers
2.
("Removing interconnect bay
Install the interconnect module, and close the release lever.
3.
If the mezzanine card is not installed properly or the interconnect module
dividers" on page 55).
Installation 47