Connecting Locally To A Server Blade With Video And Usb Devices; Accessing A Server Blade With Local Kvm - HP BladeSystem c7000 Setup And Installation Manual

To lock device bay shelf locking tab, slide it to the right.
5.

Connecting locally to a server blade with video and USB devices

Use the local I/O cable to connect a monitor and any of the following USB devices:
•
USB hub
•
USB keyboard
•
USB mouse
•
USB CD/DVD-ROM drive
•
USB diskette drive
Numerous configurations are possible. This section offers two possible configurations.

Accessing a server blade with local KVM

For this configuration, a USB hub is not necessary. To connect additional devices, use a USB hub.
CAUTION:
buttons on the sides of the connector. Failure to do so can result in damage to the equipment.
Connect the SUV cable to the blade.
1.
Connect the video connector to a monitor.
2.
Connect a USB mouse to one USB connector.
3.
Before disconnecting the SUV cable from the connector, always squeeze the release
Installation 40