HP NonStop SQL/MX Messages Manual page 633

Versioning and Distribution Messages (25000
through 25399)
SQL 25265
25265 An internal error occurred during operation: text.
Where operation is UPGRADE, DOWNGRADE, or RECOVER.
Where text is an abbreviated reason for the internal error.
Cause. A programming error is detected internally.
Effect. The operation fails.
Recovery. This is an internal error. Contact your service provider.
SQL 25266
25266 This release of RECOVER cannot process catalog because
an original operation was started by version 1 software. The
current SQL/MX Software Version (MXV) is version 2.
Where catalog is the catalog name that was mentioned in the RECOVER command.
Where version 1 is the software version that issued the original UPGRADE or
DOWNGRADE command.
Where version 2 is the MXV of the system that executes the RECOVER command.
Cause. You attempted to perform a recover operation after a fallback to a release
earlier than the one where the original UPGRADE or DOWNGRADE command was
started.
Effect. The operation fails.
Recovery. Migrate the system to version 1 and retry the RECOVER operation.
SQL 25268
25268: The DOWNGRADE command cannot complete because the
version of the system schema on remote_node is higher than
1200.
Where remote_node is the Expand node name of a remote node that is related to the
node where the DOWNGRADE command is executed.
Cause. The DOWNGRADE command was executed in a distributed environment
where one or more affected catalogs were originally created on remote_node and
where the system schema version on that node is higher than 1200.
Effect. The DOWNGRADE command fails.
HP NonStop SQL/MX Messages Manual—640324-001
19 -19