HP NonStop SQL/MX Messages Manual page 409

MXCI Messages (15000 through 15999)
SQL 15257
15257 A component name may not contain wild cards * or ?
within the name. The wild card * alone is often permitted.
Use double quotes to protect these characters in DS and EVAR
names when they are normal characters, command had: string0.
Where string0 is the component as entered in the command.
Cause. The component name is not quoted.
Effect. The operation fails.
Recovery. Enter the command with the component name enclosed in quotation
marks.
SQL 15258
15258 Object name has too many components for a string1 name,
max is int1.
Where string1 is the object type.
Where int1 is the maximum number of components allowed by the object type.
Cause. Too many components are entered for the object type.
Effect. The operation fails.
Recovery. Enter the command without the excess components for the object type.
SQL 15259
15259 string1 name component exceeds int1 character limit,
command had string2.
Where string1 is the object type.
Where int1 is the maximum number of characters allowed by the component.
Where string2 is the component with too many characters.
Cause. Too many characters are in the component.
Effect. The operation fails.
Recovery. Enter the command with a reduced number of characters in the component
specified in the error.
HP NonStop SQL/MX Messages Manual—640324-001
15 -21