HP NonStop SQL/MX Messages Manual page 433

MXCI Messages (15000 through 15999)
SQL 15367
15367 Could not get state info for DS "string0" from the
service and not trying for any other DSs.
service may never have been started and so may not know about
any DS.
Where string0 is the DS name.
Cause. The lower levels returned a status indicating no ability to provide state
information for this DS (or any other). The most likely cause is that the service has
never been started. DS names are case-sensitive, and lower letters force the use of
quotes around the DS name.
Effect. The operation fails.
Recovery. Issue the INFO SERVICE* command to determine if the service exists
and is in a started state. If it is in a stopped state, issue the START SERVICE
command.
SQL 15368
15368 Could not set automatic start option on DS string1.
Where string1 is the data source name.
Cause. A failure occurs in the client library.
Effect. The operation fails.
Recovery. See the lower-level error messages that follow this message.
SQL 15369
15369 Could not set statistics on DS string1.
Where string1 is the data source name.
Cause. A failure occurs in the client library.
Effect. The operation fails.
Recovery. See the lower-level error messages that follow this message.
SQL 15370
15370 Could not set CPU list on DS string1.
Where string1 is the data source name.
Cause. A failure occurs in the client library.
HP NonStop SQL/MX Messages Manual—640324-001
15 -45
+++SUGG: The