HP NonStop SQL/MX Messages Manual page 455

MXCI Messages (15000 through 15999)
SQL 15515
15515 This command is not allowed because a SELECT is in
progress.
Cause. When a SELECT operation is in progress, you can enter only certain MXCI
commands, such as report writer commands and:
ENV
EXIT|
RESET LAYOUT|REPORT|SESSION|STYLE FC
SET LAYOUT|SESSION|STYLE HELP
SHOW DEFINE|DEFMODE|LAYOUT|REPORT
INFO DEFINE|PARAM|SESSION|STYLE LOG
Effect. The operation fails.
Recovery. If you specified the command by mistake, enter the correct command. If
you wanted to enter the command, use the CANCEL command to terminate the
SELECT statement and reissue the command.
SQL 15516
15516 This command is allowed only when a SELECT is in
progress.
Cause. You can enter these commands only when a SELECT is in progress:
BREAK
DETAIL
PAGE TITLE BREAK FOOTING
LIST
REPORT FOOTING BREAK TITLE
NAME
REPORT TITLE CANCEL
PAGE FOOTING
SUBTOTAL TOTAL
Effect. The operation fails.
Recovery. Use these commands only with SELECT.
SQL 15517
15517 An invalid option was specified.
Cause. You specified an invalid option for the SET, RESET, SHOW, or SAVE
command.
Effect. The operation fails.
Recovery. Specify a valid option and resubmit.
HP NonStop SQL/MX Messages Manual—640324-001
15 -67