HP NonStop SQL/MX Messages Manual page 410

MXCI Messages (15000 through 15999)
SQL 15260
15260 name name component must be * or start with $, command
had string1.
missing.
Where string1 is the component of the object name as entered in the command.
Cause. The service name is incorrect. The service name can be either an asterisk (*)
or a '$' followed by a service name.
Effect. The operation fails.
Recovery. Enter the command with a valid service name. If necessary, issue an INFO
command with an asterisk (*) wild card to see all valid names.
SQL 15261
15261 SYSTEM name component must start with the back-slash
char, command had string1.
Where string1 is the component with no backslash.
Cause. The system name does not have a backslash preceding its name.
Effect. The operation fails.
Recovery. Enter the command with a backslash preceding the system name.
SQL 15262
15262 string1 name component must not be defaulted yet.
Where string1 is the missing component name.
Cause. The component is not specified in a previous command.
Effect. The operation fails.
Recovery. Enter the command with the proper component name. Do not use an
asterisk (*) wild card.
+++SUGG: Last component of name may be
HP NonStop SQL/MX Messages Manual—640324-001
15 -22