Table of Contents
Advertisement
WARNING
Verify Line Voltage before making any connections to assure that
motor harness is connected to proper motor connector on
circuit board.
1) Plug motor harness into proper motor connector on circuit board
in electric box. Fig. 13.
2) Apply primary power.
Figure 13
SINGLE PHASE
THREE PHASE
GCL-GT
Heavy Duty Operator
:
208/
240V 120V
Motor
Connectors
480/
208/
240V
575V
www.geniecompany.com
IMPORTANT
SAFETY INSTRUCTIONS
WARNING -
To reduce the risk of severe injury or death:
1) READ AND FOLLOW ALL INSTRUCTIONS.
2) Never let children operate or play with door controls. Keep the remote control (where
provided) away from children.
3) Personnel should keep away from a door in motion and keep the moving door in
sight until it is completely closed or opened. NO ONE SHOULD CROSS THE PATH OF
A MOVING DOOR.
4) Test the door's safety features at least once a month. After adjusting either the force
or the limit of travel, retest the door operator's safety features.
5) For products having a manual release, if possible, use the manual release only when
the door is closed. Use caution when operating the release while the door is open.
Weak or broken springs may cause the door to fall rapidly, causing severe injury
or death.
6) KEEP DOOR PROPERLY OPERATING AND BALANCED. See Door Manufacturer's
Owner's Manual. An improperly operating or improperly balanced door could cause
severe injury or death. Have only trained door systems technicians make repairs to
cables, spring assemblies, other hardware and any wooden blocks or like items to
which they may be attached.
7) SAVE THESE INSTRUCTIONS.
DANGER
After power is supplied to the operator, Do
:
Not make contact with components inside the control panel
except for the Keypad Keys. Fig. 1.
03-12
5.9
Advertisement
Table of Contents
