Fujitsu PRIMERGY BX400 S1 Operating Manual page 74

Installation and operation
If DHCP is activated (default), the obtained network data is
Network
displayed. Otherwise you can specify the network data manually:
– IP Address
– Subnet Mask
– Gateway
IPv4 settings
– IPv4 enable
– Obtain IP address from DHCP
– Obtain DNS address from DHCP
– DNS server 1
– DNS server 2
IPv6 settings
– IPv6 enable
– Obtain IP address from DHCP
– Obtain DNS configuration from DHCP
– DNS server 1
– DNS server 2
I/O Contains basic configuration settings for the Front-Side I/O
Module (FSIOM) and the connection blades:
FSIOM settings
– Select server blades for using USB port and DVD drive
Connection blade settings (management port IPv4):
If DHCP is activated (default), the obtained network data is
displayed. Otherwise you can specify the network data manually:
– IP Address
– Subnet Mask
– Gateway
Connection blade settings (management port IPv6):
– IPv6 enabled (OFF)
– DHCP enabled (OFF)
74 Operating Manual
BX400 S1