Fujitsu PRIMERGY BX400 S1 Operating Manual page 52

Installing the hardware
Figure 6: Installing the system unit
Ê Push the system unit into the rack as far as it will go.
Ê Fasten the system unit to the rack using the two knurled screws.
Ê Reinstall the server blades, storage blades, connection blades and
management blades, power supply units, fan units and dummy modules in
their old bays, see
assembly instructions see chapter
V
CAUTION!
Incorrect fitting of the system unit may lead to serious errors.
Removing the system unit
V
CAUTION!
Make a note of the positions of the individual server blades, storage
●
blades, connection blades, power supply units and fan modules in the
system unit for reinstallation.
To remove the system unit, follow the installation instructions in reverse.
52
"Installing/removing the system unit" on page
"Hot-plug components" on page
Operating Manual
46. For
85.
BX400 S1