8.2.14 Port Assignment Of The Connection Blades - Fujitsu PRIMERGY BX400 S1 Operating Manual

8.2.14 Port assignment of the connection blades

The A-channels of the controllers in the server blades are connected to the
connection blade slots on the left-hand side (CB1 and CB3). The B-channels
are connected to the slots on the right-hand side (CB2 and CB4).
With the mezzanine cards, the assignment of the ports to the connection blade
slots can be defined via the management blade. The following figure shows the
different options.
mezzanine card
FC 8 Gb/s
LAN 1 GbE (SB11, SB11A)
LAN 1 GbE (SB6)
Table 6: Port assignment of connection blades and mezzanine cards
BX400 S1
Server blade slot (x)
Mezzanine card slot (M)
Port (P)
x.M1.P1
x.M1.P2
x.M2.P1
x.M2.P2
x.M1.P1
x.M1.P2
x.M1.P3
x.M1.P4
x.M2.P1
x.M2.P2
x.M2.P3
x.M2.P4
x.M1.P1
x.M1.P2
x.M1.P3
x.M1.P4
x.M2.P1
x.M2.P2
x.M2.P3
x.M2.P4
Operating Manual
Hot-plug components
Connection blade slot (CB)
Port (P)
Server blade slot (x)
CB2.P1+(x-1)
CB2.P9+(x-1)
CB3.P1+(x-1)
CB4.P1+(x-1)
CB2.P1+2*(x-1)
CB2.P17+2*(x-1)
CB2.P2+2*(x-1)
CB2.P18+2*(x-1)
CB3.P1+2*(x-1)
CB4.P1+2*(x-1)
CB3.P2+2*(x-1)
CB4.P2+2*(x-1)
CB2.P1+(x-1)
CB2.P9+(x-1)
-
-
CB3.P1+(x-1)
CB4.P1+(x-1)
-
-
123