Fujitsu IP-900E Hardware User's Manual page 23

No. Names
Maintenance mode switch
(13)
(MNT)
HDMI output
(14)
(HDMI)
SDI video output
(15)
(SDI)
Video output
(16)
(ANALOG VIDEO OUT)
AUX port
(17)
(AUX)
(18) Test port
IP-900E start mode selector switch. when the IP-900E is powered on with this
switch held down, it starts in initial start mode.
See section 3.4, "Mode Switch Setting and Operation," for an explanation on
using this switch.
Digital HDMI video output terminal. 50Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Digital HD-SDI video output terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
There is no SDI video output interface for the IP-900D.
Analog video output terminal. 75Ω unbalanced.
See section 2.3, "Audio and Video Device Connections," for an explanation on
using this terminal. See Section 4.2, "Cable and Connector Details," for cable
connection information.
Auxiliary port.
Factory test port.
9
Chapter 1 Preparations
Description
IP-900E/IP-900D series