Table of Contents
Advertisement
No.
Names
RS-232C port
(11)
(RS-232C)
Audio input
(12)
(ANALOG AUDIO IN) (L), (R)
FG terminal
(13)
(FG )
Maintenance mode switch
(14)
(MNT)
HDMI input
(15)
(HDMI)
SDI video input
(16)
(SDI)
Video input
(17)
(ANALOG VIDEO IN)
(18) CF CARD slot
AUX port
(19)
(AUX)
(20) Test port
RS-232C data communication port.
See Section 2.5, "Connection to an RS-232C Device," for an
explanation on using this pin. See Section 4.2, "Cable and Connector
Details," for cable connection information.
Unbalanced audio input terminal.
See Section 2.3, "Audio and Video Device Connections," for an
explanation on using this terminal. See Section 4.2, "Cable and
Connector Details," for cable connection information.
Use for an FG connection to the device.
See Section 2.2.1, "Connection to ground," for an explanation on using
this terminal.
IP-900E start mode selector switch. when the IP-900E is powered on
with this switch held down, it starts in initial start mode.
See section 3.4, "Mode Switch Setting and Operation," for an
explanation on using this switch.
Digital HDMI video input terminal. 50Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an
explanation on using this terminal. See Section 4.2, "Cable and
Connector Details," for cable connection information.
Digital HD-SDI video input terminal. 75Ω unbalanced.
See Section 2.3, "Audio and Video Device Connections," for an
explanation on using this terminal. See Section 4.2, "Cable and
Connector Details," for cable connection information.
Analog video input terminal. 75Ω unbalanced.
See section 2.3, "Audio and Video Device Connections," for an
explanation on using this terminal. See Section 4.2, "Cable and
Connector Details," for cable connection information.
Slot in which a CompactFlash
Auxiliary port.
Factory test port.
7
Chapter 1 Preparations
Description
@
card is inserted.
IP-900E/IP-900D series
Advertisement
Table of Contents
