Connecting External Antennas; Connecting Auxiliary Components - Pioneer S-HTD340 Operating Instructions Manual

Additional information
electric shock. Do not place the system unit, a
piece of furniture, or other object on the power
cord or pinch the cord in any other way. Never
make a knot in the cord or tie it with other
cords. The power cord should be routed so that
they are not likely to be stepped on. A damaged
power cord can cause a fire or give you an
electric shock. Check the power cord once in a
while. If you find it damaged, ask your nearest
Pioneer authorized service center or your
dealer for a replacement.

Connecting external antennas

External AM antenna
Use 5–6 meters (15–18 feet) of vinyl-insulated
wire and set up either indoors or outdoors.
Leave the AM loop antenna connected.
Outdoor antenna
Indoor
antenna
(vinyl-coated
wire)
15–18 ft. / 5–6m
External FM antenna
Use 75Ω coaxial cable to hook up an external
FM antenna.
75Ω coaxial cable
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75

Connecting auxiliary components

This system has both stereo analog inputs and
outputs, as well as a coaxial digital input. Use
these to connect external components, such
as your VCR, MD or CD-R recorder.
ANTENNA
AM LOOP
•
ANTENNA
analog outputs of an external playback
FM
UNBAL
75
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables.
•
analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD or another recorder with analog
inputs. Connect using RCA pin-plug stereo
cables.
•
the rear panel to the coaxial digital output
of an external playback component.
Tape deck, etc.
AUDIO
INPUT
AUDIO
OUT IN
COAXIAL IN
L
LINE 2
R
LINE 1
Connect the LINE 1 (IN) jacks to the
Connect the LINE 1 (OUT) jacks to the
Connect the COAX IN (LINE 2) jack on
12
AUDIO
OUTPUT
ANTENNA
AM LOOP
ANTENNA
IN
L
FM
UNBAL
75
R
TV
71
En